Guides and technical notes
How to choose carbon fibre for a job: grades, constructions and what to check before you buy.
Articles
7 September 2026
MOQs Explained: Why the Minimum Order Is What It Is
Why carbon fibre suppliers set minimum order quantities, why the number differs between rod, tube, fabric and prepreg, and the legitimate ways to work around one.
2 September 2026
Tolerances in Composites: What Suppliers Actually Hold
Why pultruded rod, roll wrapped tube and moulded plate hold very different tolerances, why the tightest number is rarely the right one to specify, and how to ask for what you need.
28 August 2026
Cure Temperature and Tg: Why 80°C Cure Gives 91°C Tg
Why a resin that cures at 80 degrees reports a glass transition temperature of 91, the three ways Tg is measured, and which figure to design to.
25 August 2026
Carbon Fibre Fabric Weaves and Weights Explained
Plain, twill, satin, unidirectional, biaxial and triaxial carbon fabrics compared, plus what gsm and 3K or 12K tow mean when choosing a reinforcement.
25 August 2026
Carbon Fibre Sheet Layups: Twill, Quasi-Isotropic and Unidirectional
How carbon fibre sheet and plate layups differ. Cosmetic twill, quasi-isotropic and unidirectional compared, and how to pick the right one for your panel.
25 August 2026
Fibreglass vs Carbon Fibre Rods: Which to Choose
Carbon fibre and fibreglass rods compared on stiffness, weight, cost, flex and electrical properties, so you can pick the right one for your application.
25 August 2026
How to Choose Carbon Fibre Tube Diameter and Wall Thickness
A practical guide to sizing carbon fibre tube: why diameter beats wall thickness for stiffness, when a thicker wall is necessary, and round versus square sections.
22 August 2026
Landed Cost: What Sits Between the Quote and Your Bench
Why a quoted price per kilogram is not what carbon fibre costs you. Freight, duty, clearance, VAT recovery and the hidden costs of importing composites into the UAE.
17 August 2026
How to Write a Composites RFQ That Gets Quoted Fast
The information a carbon fibre supplier needs to quote in one pass, why most enquiries take three rounds, and a checklist you can send with any composites requirement.
12 August 2026
Non-Chinese Carbon Fibre: When Origin Actually Matters
Korean, Japanese, Turkish, Taiwanese and European carbon fibre compared with Chinese material. When origin is a genuine requirement, when it is a preference, and how to evidence it.
10 August 2026
Carbon Fibre for UAV Airframes: Choosing Tubes and Rods
How to select carbon fibre tubes and rods for UAV and drone airframes: grades, tube construction, the weight versus stiffness trade, and sourcing in the UAE.
10 August 2026
Carbon Fibre Rod Grades Explained: T300, T700 and High-Modulus
What T300, T700 and high-modulus M-series carbon fibre rods mean, how strength and stiffness differ, and which grade suits UAV, marine and structural use.
10 August 2026
Pultruded vs Roll-Wrapped vs Prepreg Carbon Fibre Tube: Which to Choose
The three main carbon fibre tube constructions compared: pultruded, roll-wrapped and moulded prepreg. How each performs and which suits your load case.
10 August 2026
Sourcing Carbon Fibre in the UAE: Lead Times, Documentation and What to Check
A practical guide to buying carbon fibre in the UAE: buying locally versus import lead times, what documentation to agree before you order, and how to vet a supplier.
6 August 2026
Where UAE Carbon Fibre Actually Comes From: The Import Data
UAE carbon fibre imports doubled between 2022 and 2023, and most of it arrives from Europe rather than China. What the trade data shows about origin, price and the gap in local conversion.
1 August 2026
CFRP Structural Strengthening: Plate, Rod or Wrap?
How to choose between pultruded CFRP plate, near surface mounted rod and unidirectional wrap fabric for strengthening concrete columns, beams and slabs, and what a complete system includes.
27 July 2026
Buying Prepreg in the UAE: What to Specify and What to Ask
A practical guide to specifying and sourcing carbon, glass and aramid prepreg in the UAE: resin systems, cure schedules, shelf life, cold chain and the questions to ask before you order.