Carbon fibre prepreg
Reinforcement pre-impregnated with resin at the mill at a controlled resin content, supplied interleaved with release paper and polyethylene film. Chosen where repeatable fibre volume and consistent mechanical performance matter more than the flexibility of wet layup.
Specification
| Property | Typical value |
|---|---|
| Reinforcement | Carbon, glass and aramid |
| Construction | Unidirectional and woven |
| Matrix | Epoxy, low and elevated temperature cure systems |
| Format | Interleaved with release paper and polyethylene film |
| Storage | Frozen storage required, shelf life and out-life confirmed per order |
| Cure schedule | Matched to the equipment you have |
Resin system, cure schedule, areal weight and roll width are confirmed against your application at quotation stage.
Typical applications
- Tubes and profiles
- UAV and airframe components
- sporting goods
- industrial and structural components
- radomes and electrical enclosures in glass
Cure schedule first
There is no point specifying a resin that cures at 120 degrees if your oven reaches 90. Tell us the cure equipment you have and the service temperature the part sees, and we will work backward to a system that fits both.