Carbon fibre products
We supply carbon fibre only. No fibreglass side lines, no resin trading, no general building materials. That focus is deliberate, because it is the only way to hold real technical depth on one material.
Sizes and grades below cover our standard range. Tolerances and mechanical property data are in the technical datasheet on each product page. Anything outside the range is quoted on request, so if you do not see your size, ask.
Product families we supply
2 to 20 mm diameter
Carbon fibre rods
Pultruded solid rods, 2 to 20 mm diameter, in T300 through to high modulus M55J grades.
0.25 to 10 mm thick
Carbon fibre sheets and plates
Flat laminate, 0.25 to 10 mm thick, in cosmetic twill, quasi-isotropic and unidirectional layups.
4 to 50 mm outer diameter
Carbon fibre tubes
Round, square and rectangular sections. Round from 4 to 50 mm outer diameter, 0.5 to 3 mm wall.
Standard sections to 2000 mm
Carbon fibre profiles
Angles, channels, I beams, flat bars, T and Z sections in T300 and T700, cut to size up to 2000 mm.
80 to 600 gsm
Carbon fibre fabrics
Plain, twill, satin, unidirectional and multiaxial. 80 to 600 gsm, in 3K, 6K and 12K tow.
80 to 600 gsm
Carbon fibre prepreg
Carbon, glass and aramid prepreg on epoxy matrix, unidirectional and woven.
Supplied as a system
Structural strengthening systems
Matched CFRP systems for concrete and masonry strengthening.
We also supply fibreglass rods for applications that do not need carbon, where cost or electrical insulation matters more than weight.
Choosing a fibre grade
| Grade | Choose it when | Typical applications |
|---|---|---|
| T300 | Cost matters more than stiffness | General engineering, jigs and fixtures, structural parts |
| T700 | You need more strength without a large cost step | UAV airframes and booms, automotive components |
| T800 | Weight is the binding constraint | Motorsport and weight critical structures |
| M40J, M55J | Deflection is the problem, not strength | Stiffness critical applications, quoted on request |
Not sure which grade your part needs? Send us the load case and we will work through it with you.